Posts Tagged channel mixer
Behringer PMP2000 800-Watt 10-Channel Powered Reviews
- Ultra-compact 2 x 350-Watt stereo powered mixer (800 Watt bridged mode)
- Ultra-Low Noise ULN design, high headroom and ultra-transparent audio
- 10-channel mixer section features 6 mono and 3 stereo channels plus separate CD/Tape inputs
- Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
800-Watt 10-Channel Powered Mixer with Multi-FX ProcessorIf you need superior stereo sound for small club gigs, churches or speeches, but have to keep the outboard gear to a minimum, the 10-channel PMP2000 can really deliver. This 800-Watt mixer has built-in mic preamps and an FX processor, as well as enough power to drive both mains and monitors, thanks to dual 350-Watt onboard power amps.
 |
Choose from 2 x 350-Watt stereo, 2 x 350-Watt dual mono or 800-Watt bridged mono output. |
100 mind-blowing digital effect presets such as delay, chorus and reverb. |
Massive Mono or Stunning Stereo
The PMP2000 gives you the choice of 2 x 350-Watt stereo, 2 x 350-Watt dual mono or 800-Watt bridged mono output. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP2000 can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.
Classic Control, State-of-the-Art Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Nine built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the PMP2000.
Built-in Digital Effects Processor
It’s also equipped with a 24-bit FX processor, giving you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. In case you’re pulling double duty as sound engineer and performer, the FX processor has a footswitch jack for remote on/off.
Changing the Channels
The PMP2000 gives you loads of flexibility in accommodating whatever the center of attention happens to be. Channels 1-6 are for mics, bass guitars or other mono instruments. Stereo channels 7-12 are ideal for keyboards. Use the 2TR IN RCA inputs to feed in external stereo signals from CD players or tape decks.
The Ins and Outs
REC OUT RCA outputs send line-level signals from the mixer to a recording device, so you can finally get to work on that triple-live album you’ve always dreamed of. The left and right Output 1/4-inch connectors are there just in case you need to connect more amps. Connect your monitor power amps or active monitor speakers to the MONITOR output.
What’s in the Box
Behringer PMP2000, Power Cable, User’s Manual
List Price: $ 761.99
Price:
Tags: channel mixer, clip leds, condenser mics, digital effects processor, dual mono, mixer section, mono channels, mono output, pitch shifter, powered mixerRelated posts
Behringer XENYX1002 10-Channel Mixer Reviews
- Premium ultra low-noise, high headroom analog mixer
- Two state-of-the-art XENYX mic preamps, comparable to stand-alone boutique preamps
- Neo-classic “British” three-band EQs for warm and musical sound
- One post-fader FX send per channel for external FX devices
- Main mix outputs plus separate control room, phones and stereo CD/tape outputs
From bare-bones rock and roll to a mellow folk ensemble, the 10-input, two-bus XENYX 1002 can give an intimate performance the vibe it needs to sound great in the crowd as well as on record. It’s simple to transport, simple to use and simply essential.
Simple to transport, simple to use and simply essential. Click to enlarge. |
Two state-of-the-art XENYX mic preamps. |
Play music between sets via the RCA CD/tape inputs. |
The Ins and Outs
The XENYX 1002 has two XENYX mic preamps with +48 V phantom power, making it possible to use two dynamic or condenser microphones. The three-band British EQ ensures warm, musical sound. Simple controls with rich musicality make it possible to create beautiful mixes with minimal technical expertise.
Play music between sets via the RCA CD/tape inputs (assignable to main mix or control room/phones outputs) and record your performance to an outboard recording device via the RCA outputs.
FX Send
Add some outboard digital magic to your sound using the FX SEND. Simply connect an outboard device to apply effects such as reverb or delay.
So Very Portable
Weighing in at just 2.3 pounds (1.05 kg), the XENYX 1002 is the portable, practical way to turn a small performance with two vocalists into an arresting sonic spectacle.
Value
Lending optimum sound quality to small-scale performances has never been this easy or affordable. The XENYX 1002 provides incredible versatility at a price other mixers in this class simply cannot touch.
XENYX 1002 Features
- Premium ultra low-noise, high headroom analog mixer
- 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
- Neo-classic “British” 3-band EQs for warm and musical sound
- 1 post fader FX send per channel for external FX devices
- Main mix outputs plus separate control room, phones and stereo CD/tape outputs
- CD/tape inputs assignable to main mix or control room/phones outputs
- FX to control room function helps to monitor effect signal via headphones and control room outputs
- Long-wearing 60-mm logarithmic-taper master fader and sealed rotary controls
- High-quality components and exceptionally rugged construction ensure long life
What’s in the Box
Behringer XENYX 1002 Mixer, Power Supply, User’s Manual, Quick Start Guide
List Price: $ 151.99
Price:
- Eight-channel mixer with mic, line, and guitar-level inputs
- 16-bit, 44.1/48 kHz stereo USB output for easy recording and playback from your computer
- XLR inputs with gain trim, switchable high-pass filters, and 48V phantom power
- Powerful EQ: three-band with sweepable parametric mids on channels 1 and 2, three-band on 3 and 4, two-band on 5 – 8
- Includes Cubase LE software
This compact mixer with built-in effects doubles as a computer recording interface so you can mix, record, or do both at the same time. Whether you are mixing a band or sub-mixing a group of inputs, such as a drumset, the MultiMix 8 USB FX is easy to use, rugged, and packed with features. Offering microphone inputs with phantom power, guitar-direct inputs, and line-level inputs for connecting everything else, plus a wide range of effects, the MultiMix 8 USB FX delivers clean audio to your PA or recording system plus hassle-free computer connection.
List Price: $ 199.00
Price:
Tags: channel mixer, condenser microphones, digital magic, intimate performance, minimal technical expertise, optimum sound quality, rca cd, rca outputs, tape inputs, tape outputsRelated posts